Lighting Parts
23 products
23 products
Sort by:
$25.00
Unit price per$25.00
Unit price perFEATURES
This suspension unit comes with chrome ceiling rose, 1.2m silver cord and lamp holder. You can use this with your existing lamp shade, E27 fitting ones.
SPECIFICATIONS :
Finish:
1. Chrome ceiling rose, silver cord and E27 lamp holder
2. White ceiling rose, White cord and E27 lamp holder
3. Black ceiling rose, Black cord and E27 lamp holder
Diameter of ceiling rose: 100mm
Suspension unit: 1200mm (We can extend the length of cable on request)
Light bulb: E27, MAX 60W, (not Included)
You could use Incandescent bulb, ECO bulb or LED bulb.
$6.90
Unit price per$6.90
Unit price perFeatures
This square packer enables wall lights sit straight on the weatherboard walls.
This is a prefect solutions for weatherboard.
Finish
Plastic white
Dimension
110mm*110mm
$29.00
Unit price per$29.00
Unit price perFEATURES
This suspension unit comes with black ceiling rose, 1.2m black cord and antique brass lamp holder. Ideal for hanging over kitchen island, hallway or bedside. Using a filament bulb might be a good idea to further enhance the dramatic look. We have three styles available: LBA, LBB and LBC.
SPECIFICATIONS :
Finish: Black ceiling rose, black cord with antique brass lamp holder
Diameter of ceiling rose: 120mm
Suspension :1200mm (We can extend the length of cable on request)
Light bulb: E27, MAX 60W, (not Included)
You could use Incandescent bulb, Filament bulb, ECO bulb or LED bulb.
Code: ED76
$18.00
Unit price per$18.00
Unit price perFEATURES
This suspension unit comes with plastic ceiling rose, 1.2m silver cord and lamp holder. You can use this with your lamp shade, E27 fitting ones. No earth wire needed.
SPECIFICATIONS :
Finish:
1. White ceiling rose, White cord and E27 lamp holder
2. Black ceiling rose, Black cord and E27 lamp holder
Diameter of ceiling rose: 90mm
Suspension unit: 1200mm
Light bulb: E27, MAX 60W, (not Included)
You could use Incandescent bulb, ECO bulb or LED bulb.
$7.80
Unit price per$7.80
Unit price perFeatures
This plate is an innovative solution in allowing you to retro-fit low voltage halogen and LED downlights into existing 240v incandescent recessed lighting cutout holes
The slim line design fits flush to the ceiling.
Finish
White
Applications
A highly cost effective retro fit solution designed to replace existing incandescent downlights without the extra cost of re-plastering your ceiling.
Dimension
Inside: 95mm
Outside: 130mm
We have other two sizes available.
$5.00
Unit price per$5.00
Unit price perFeatures
This plate is an innovative solution in allowing you to retro-fit low voltage halogen and LED downlights into existing 240v incandescent recessed lighting cutout holes
The slim line design fits flush to the ceiling.
Finish
White
Applications
A highly cost effective retro fit solution designed to replace existing incandescent downlights without the extra cost of re-plastering your ceiling.
Dimension
Inside: 75mm
Outside: 110mm
We have other two sizes available.
$25.00
Unit price per$25.00
Unit price perSPECIFICATIONS :
Finish: Chrome or White or Black
Ceiling part will be some color as pendant part
Dimensions:
Suspension :1200mm (We can extend the length of cable on request)
Light bulb: E27, MAX 60W, (not Included)
You could use Incandescent bulb, ECO bulb or LED bulb.
$89.00
Unit price per$89.00
Unit price perAPPLICATIONS
Crystals ring can be used on table lamp and floor lamp. It can be added onto your hanging shade as well.
SPECIFICATIONS
Finish: Top quality clear crystals
Diameter: 250mm Length: 180mm($69)
We have more than one available.
We have three different pendant drops. A, B, C.
$49.00
Unit price per$49.00
Unit price perAPPLICATIONS
Crystals ring can be used on table lamp and floor lamp. It can be added onto your hanging shade as well.
SPECIFICATIONS
Finish: Top quality clear crystals
Diameter: 160mm Length: 180mm($49)
We have more than one available.
We have three different pendant drops. A, B, C.
$8.00
Unit price per$8.00
Unit price perFeatures
This plate is an innovative solution in allowing you to retro-fit low voltage halogen and LED downlights into existing 240v incandescent recessed lighting cutout holes
The slim line design fits flush to the ceiling.
Finish
White
Applications
A highly cost effective retro fit solution designed to replace existing incandescent downlights without the extra cost of re-plastering your ceiling.
Dimension
Inside: 115mm
Outside: 170mm
We have other two sizes available.
$69.00
Unit price per$69.00
Unit price perAPPLICATIONS
Crystals ring can be used on table lamp and floor lamp. It can be added onto your hanging shade as well.
SPECIFICATIONS
Finish: Top quality clear crystals
Diameter: 250mm Length: 180mm($59) short one
The long crystal drops is $89.
We have more than one available.
We have three different pendant drops. A, B, C.
$7.80
Unit price per$7.80
Unit price perFeatures
This plate is an innovative solution in allowing you to retro-fit low voltage halogen and LED downlights into existing 240v incandescent recessed lighting cutout holes
The slim line design fits flush to the ceiling.
Finish
Satin Nikel
Applications
A highly cost effective retro fit solution designed to replace existing incandescent downlights without the extra cost of re-plastering your ceiling.
Dimension
Inside: 95mm
Outside: 130mm
We have other two sizes available.
$5.00
Unit price per$5.00
Unit price perFeatures
This plate is an innovative solution in allowing you to retro-fit low voltage halogen and LED downlights into existing 240v incandescent recessed lighting cutout holes
The slim line design fits flush to the ceiling.
Finish
Satin Nikel
Applications
A highly cost effective retro fit solution designed to replace existing incandescent downlights without the extra cost of re-plastering your ceiling.
Dimension
Inside: 75mm
Outside: 110mm
We have other two sizes available.
$59.00
Unit price per$59.00
Unit price perFEATURES
400mm round plate enables you to DIY your own lights.
APPLICATIONS
Ideal feature light for stair way or Entrance way
Dining table
Lounge
SPECIFICATIONS
Finish: matt black
Dimensions:
Diameter: 400mm
Code: round plate
$40.00
Unit price per$40.00
Unit price perNow $40
FEATURES
180mm round plate enables you to DIY your own lights up to 8 lights in one ceiling rose.
APPLICATIONS
Ideal feature light for stair way or Entrance way
Dining table
Lounge
SPECIFICATIONS
Finish: shinning chromed
Dimensions:
Diameter: 180mm
Code: round plate
$29.00
Unit price per
$29.00
Unit price per$29.00
Unit price perIncluding aluminum and plastic defuser
$30.00
Unit price per$30.00
Unit price per
$20.00
Unit price per$20.00
Unit price per
$50.00
Unit price per
$8.00
Unit price per$8.00
Unit price perFeatures
This plate is an innovative solution in allowing you to retro-fit low voltage halogen and LED downlights into existing 240v incandescent recessed lighting cutout holes
The slim line design fits flush to the ceiling.
Finish
Satin Nikel
Applications
A highly cost effective retro fit solution designed to replace existing incandescent downlights without the extra cost of re-plastering your ceiling.
Dimension
Inside: 115mm
Outside: 170mm
We have other two sizes available.